And check for humming technicians, too.
If you’re getting a hum in your sound, replace your cables with shielded cables, or new cables, or at least don’t run them next to or across power cables. Make sure they’re properly grounded.

If you’re getting a hum in your sound, replace your cables with shielded cables, or new cables, or at least don’t run them next to or across power cables. Make sure they’re properly grounded.

You know those little adapters that let you plug a three-prong plug into a two-hole socket? Don’t use those.
(more…)
Your location owner might have to lock their doors after a certain time, but if you ask nice, they might let you run an extension cord or two out through a little hole. Then, you can leave ’em coiled up after you’re done and come by in the morning and pick all your cords back up.
(more…)
Fix or repair broken cords, and do it right. If you can’t do it right, then cut them up and throw them away.
(more…)
When taping cables and cords down, always leave a very generous series of loops at each C-stand, tripod, or workstation. This is so you can move stuff around without retaping.
(more…)
When connecting one extension cord to another, or an extension cord to a light, try to always tie the cords in a knot before connecting them. That way, if the cords are pulled in opposite directions, they tighten instead of pulling loose.
(more…)
In a pinch, shop light’s do just fine. The color balance is great and they’re cheap as hell. Every home improvement place has ’em. You have to take off those little grills, but you probably would figure that out on your own.
(more…)
If you find extension cords for sale, especially long ones, get a bunch. Use a sharpie and write your name and contact information on each one, at each end. If you can, get a weird color (I have a purple extension cord that I have never lost), but if not, definitely mark them at each end. And it’s probably the case that you can’t have too many.
(more…)